Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Weed growth between bricks can make patios slippery, look unkempt, and damage mortar over time. Choosing the right weed killer for brick patio matters because some treatments burn foliage but leave roots intact, while others can stain or erode masonry. This guide covers a short list of top-rated options suited to brick surfaces and different gardening goals, from quick spot treatments to longer-term prevention. We evaluated candidates for how well they remove or suppress regrowth and how safe they are for brick and surrounding plants. Read on to find an option that matches the level of persistence you need and the care your patio requires.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | RM43 Total Vegetation Control 43% Glyphosate Plus Weed Preventer, 2.5-Gallon | ![]() |
| Best Quality Built to a higher standard if you want something more solid | Roundup Weed & Grass Killer4 with Pump 'N Go 2 Sprayer, 1.33 gal | ![]() |
| Best Value The sweet spot between price and what you get | Spruce Weed & Grass Killer Refill, Ready-to-Use 64 fl oz | ![]() |
| Best Budget The cheapest option that still gets the job done reliably | Spectracide Weed & Grass Killer Concentrate, 16 fl oz | ![]() |
| Most Popular A crowd favorite that many people choose with confidence | Spectracide Weed & Grass Killer with AccuShot Power Sprayer, 1.33 Gal | ![]() |
| Best Seller A high-volume bestseller chosen again and again | Ortho GroundClear Weed & Grass Killer with Comfort Wand, 1 gal. | ![]() |
RM43 Total Vegetation Control 43% Glyphosate Plus Weed Preventer, 2.5-Gallon
| Unit Count | 320 Fluid Ounces |
|---|---|
| Liquid Volume | 320 fluid ounces |
| Coverage | 243 243 square feet |
| Active Ingredients | Glyphosate isopropylamine salt, Imazapyr isopropylamine salt |
RM43 Total Vegetation Control is a concentrated 2.5‑gallon herbicide intended for killing existing growth and preventing regrowth for up to a year on areas where no vegetation is desired. You mix it into spray solution and apply to hardscape edges, gravel driveways, fence rows, and around buildings as either spot treatments or blanket applications on bare ground. The formula pairs glyphosate and imazapyr with a surfactant so it kills grasses, broadleaf weeds, vines, brush and some woody growth and becomes rainfast in about two hours. Practical benefits for driveway use include long residual control that reduces repeat spraying and a large coverage rate that treats many square feet from one container. Important limitations are that it is for non‑crop areas only and will damage desirable plants if sprayed over roots or drift occurs, and the active ingredient blend makes it persistent so care is required where you may later want vegetation to return. Follow label directions for mixing, application timing and safety precautions when using near soil that will be planted later.
Best for: Gardeners, property owners, and maintenance crews who prioritize strong, long‑lasting weed eradication on gravel driveways and other non‑crop hardscape areas and want to minimize repeat applications.
Less Ideal for: Homeowners planning to replant treated areas soon or those needing selective weed control near desirable plants should choose a less persistent or more targeted product.
- Combination of glyphosate and imazapyr for both knockdown and long residual control
- Concentrated 2.5‑gallon container covers large areas without frequent refills
- Rainfast in about two hours so light rain soon after application is less likely to reduce effectiveness
- Suitable for total vegetation control on gravel driveways, fence rows and other non‑crop areas
- Persistent active ingredients that can prevent desirable vegetation from reestablishing for an extended period
- Not safe for use where desirable plant roots may be exposed or where drift could contact nearby plants
Verdict: Choose RM43 when you need a single, heavy‑duty application that delivers broad spectrum kill and up to a year of weed prevention on gravel driveways and other non‑crop surfaces.
Roundup Weed & Grass Killer4 with Pump 'N Go 2 Sprayer, 1.33 gal
| Unit Count | 170 Fluid Ounces |
|---|---|
| Item Form | Spray |
| Coverage | 300 Square_Feet |
| Active Ingredients | Triclopyr, Triethylamine Salt, Fluazifop-P-Butyl, Diquat Dibromide |
This Roundup Weed & Grass Killer4 comes in a 1.33 gallon container with an integrated Pump 'N Go 2 sprayer that lets you apply a continuous stream for up to 10 minutes without mixing. It is formulated to kill a wide range of broadleaf weeds and grasses down to the root and advertises visible browning in hours and rainproof protection in about 30 minutes, so treated areas can be replanted in 1 to 30 days depending on instructions. The extendable wand improves accuracy for edging around flower beds, foundations, and hard surfaces so you can target unwanted plants without bending over. Practical benefits include straightforward one-hand spraying, coverage suitable for small- to medium-scale cleanup, and a clear safety section that emphasizes protective clothing and keeping people and pets away until the spray dries. Important limitations are that it is a chemical herbicide with active ingredients buyers should review for toxicity and environmental impact, and it requires careful application to avoid drift onto desirable plants. The sprayer is convenient but adds weight as you carry and handle the full container.
Best for: Gardeners who want a ready-to-use, targeted herbicide to quickly clear weeds around beds and hardscapes and who prioritize easy application and fast visible results guided by other buyers' experience.
Less Ideal for: Organic gardeners or those who prefer nonchemical methods should look for mechanical or organic alternatives, and users who need very large-area broadcast control may prefer concentrate products or professional services.
- Built-in Pump 'N Go 2 sprayer with extendable wand for up to 10 minutes of continuous spray
- Produces visible results in hours and becomes rainproof in about 30 minutes
- Designed for use around flower beds, hardscapes, mulch and foundations for targeted spot treatment
- Covers a useful area from a single bottle suitable for small to medium beds
- Contains synthetic active ingredients that require careful handling and distancing of people and pets until dry
- Risk of harming nearby desirable plants if not applied precisely
Verdict: If you want a convenient, ready-to-use sprayer that gives fast, targeted weed control around garden beds and hardscapes, this package is a practical pick.
Spruce Weed & Grass Killer Refill, Ready-to-Use 64 fl oz
| Unit Count | 64 Fluid Ounces |
|---|---|
| Item Form | Spray |
| Coverage | 1 bottle treats up to 400 weeds |
| Active Ingredients | Sodium Lauryl Sulfate, Geraniol, Cornmint Oil |
This 64 fl oz Spruce refill is a no-mix replacement for the brand's Snap & Spray system that provides a convenient, ready-to-use weed and grass killer for spot treatments. It works on contact, dehydrating foliage with visible leaf darkening or wilting within an hour and complete plant death often by 24 hours. The formula relies on water, essential oils and sodium lauryl sulfate rather than synthetic herbicides, which makes it suitable for use around people and pets when directions are followed. One bottle is rated to treat up to about 400 weeds and is designed for hard surfaces, mulch beds, driveways and pavers rather than broadcast lawn application. Practical features include a snap-on refill top for the existing spray handle and a fast rainproof window of roughly 10 minutes. Be aware it is non-selective and must be applied carefully to avoid desirable plants, and it is most effective on young or small weeds rather than deep perennial roots where reapplication may be needed.
Best for: Buyers who want a low-fuss, pet-conscious spot weed killer for driveways, pavers and mulch beds and who prioritize convenience and visible speed of action.
Less Ideal for: Homeowners seeking a selective lawn treatment or long-term control of deeply rooted perennials should consider different systemic or professional options.
- Ready-to-use refill eliminates mixing and pouring
- Visible results in about one hour with full effect by 24 hours
- Formulated with water and essential oils for pet- and people-friendly use when directed
- Covers a high estimated count — one bottle treats up to 400 weeds
- Snap-on refill design fits the Spruce Snap & Spray handle for quick replacement
- Non-selective formula will damage desirable plants if oversprayed
- Less effective on large established perennial roots compared with systemic herbicides
Verdict: Choose this refill if you want a fast, ready-to-use, pet-conscious spot treatment that snaps into the Spruce spray handle for effortless weed control on hardscapes and beds.
Spectracide Weed & Grass Killer Concentrate, 16 fl oz
| Unit Count | 16 Fluid Ounces |
|---|---|
| Item Form | Spray |
| Coverage | 7 fl oz per gallon covers up to 300 sq ft |
| Rainproof time | 15 minutes |
| Visible results | As fast as 3 hours |
This Spectracide concentrate is a practical, fast-acting option for clearing unwanted weeds and grasses from hard surfaces and around garden beds. You mix the 16 fl oz bottle with water and apply with a tank sprayer for spot treatments; the label rate (7 fl oz per gallon) covers roughly 300 sq ft per treatment. The formula is rainproof after 15 minutes and can show visible dieback in as little as three hours, letting you replant in treated areas after about a day. It is nonselective, so it kills foliage down to the root and requires care to avoid desirable plants. Because it is a concentrate, small bottles treat a larger area than ready-to-use sprays, which is useful for recurring patch treatments while keeping storage space low. Important limits are the usual safety precautions for herbicides and the need to shield nearby plants and follow temperature guidance for best results. For someone wanting a straightforward, effective knockdown of pavement and edge weeds, this performs reliably when used as directed.
Best for: Buyers who want a cost-effective, no-nonsense herbicide to tackle spot infestations on driveways, walkways and edges and who are comfortable mixing and applying a concentrate.
Less Ideal for: Customers who need a gentle or selective lawn-safe product or who prefer ready-to-use sprays with no mixing should look elsewhere.
- Concentrated formula covers a larger area per ounce than ready-to-use products
- Fast visible results in as little as 3 hours and rainproof after 15 minutes
- Kills weeds and grasses down to the root for longer-lasting control
- Nonselective formula can damage desirable plants if oversprayed
- Requires mixing and a separate tank sprayer rather than a ready-to-use bottle
Verdict: A concentrated, fast-acting spot herbicide that delivers economical, root-killing weed control for paved areas and edges.
Spectracide Weed & Grass Killer with AccuShot Power Sprayer, 1.33 Gal
| Unit Count | 170 Fluid Ounces |
|---|---|
| Item Form | Spray |
| Coverage | 1 gallon |
| Active Ingredients | Diquat Dibromide 0.12%, Fluazifop-p-butyl 0.06%, Dicamba 0.04% |
Spectracide Weed & Grass Killer pairs a concentrated non-selective formula with a battery-powered AccuShot sprayer to clear weeds from driveway cracks, patios and around foundations. The product is used by aiming and spraying foliage until leaves are covered; the active ingredients move through the leaf to the root and can show visible die-back in as little as three hours. The AccuShot wand is extendable and provides continuous spray without manual pumping, which improves accuracy for narrow cracks and reduces hand fatigue during larger jobs. It is rainproof within 15 minutes, so treated areas are protected quickly. Practical benefits include fast results that let you replant or resume use of the area within a day and a reusable sprayer for follow-up applications. Important limitations are that the herbicide is non-selective so it will kill any plant it contacts, it requires careful handling and PPE to avoid skin or eye exposure, and the sprayer runs on four AA batteries that must be replaced periodically. Follow label directions to avoid runoff into water.
Best for: Buyers who want a fast, no-nonsense solution for weeds growing in driveways and hard surfaces and who prioritize tools with clear user feedback and proven results.
Less Ideal for: Gardeners who need a selective lawn-safe treatment, people unwilling to follow pesticide safety precautions, or those treating areas adjacent to water features.
- AccuShot battery-powered wand gives continuous spray for accurate application in tight cracks
- Formula moves through foliage to kill weeds down to the root with visible results in about three hours
- Rainproof after 15 minutes so treatments are not easily washed away by brief showers
- Covers approximately 300 square feet per gallon, suitable for multiple crack-treatment sessions
- Non-selective herbicide will damage any desirable plants it contacts
- Sprayer requires four AA batteries and occasional replacement to maintain function
- Product is toxic to aquatic life and must not be used near water or allowed to run off
Verdict: A fast-acting, easy-to-aim non-selective herbicide with a battery-powered wand that is well suited to reliably clear weeds from driveway cracks and other hard surfaces.
Ortho GroundClear Weed & Grass Killer with Comfort Wand, 1 gal.
| Item Form | Spray |
|---|---|
| Coverage | 5120 square feet |
| Unit Count | 128 Fluid Ounces |
| Active Ingredients | Ammonium Nonanoate |
Ortho GroundClear is a one-gallon ready-to-use weed and grass spray designed for spot and surface treatment on driveways, walkways, patios, and landscape beds. The formula absorbs on contact and shows visible browning in about 15 minutes, becoming rainproof roughly two hours after drying, which helps when weather is unpredictable. The included Comfort Wand makes it easy to aim at weeds growing between gravel and pavers without soaking surrounding surfaces. It is OMRI Listed, so it can fit into some organic-minded maintenance routines. Coverage is large for a single container, and the product lists ammonium nonanoate as the active ingredient, which works by contact so small or actively growing weeds are best treated. Because it is a contact herbicide, perennial or well-established weeds may need repeat applications or mechanical removal for full control, and care is required to avoid spray drift onto desirable plants. Follow safety directions and keep pets and children away until treated areas are dry.
Best for: Homeowners who want a practical, hands-on solution to remove weeds from gravel driveways and hardscapes and who prioritize quick, targeted results with minimal setup.
Less Ideal for: People seeking a long-term systemic control for deep-rooted perennial weeds or a total lawn herbicide should consider systemic products or integrated mechanical removal instead.
- Fast visible results on contact, often browning in about 15 minutes.
- Comfort Wand enables precise targeting in gravel joints and along edges.
- Becomes rainproof in approximately 2 hours, reducing loss from unexpected rain.
- OMRI Listed, compatible with some organic production standards.
- Contact-only action means deeper or perennial roots may require multiple applications.
- Spray can damage nearby desired plants if not applied carefully.
Verdict: A fast, ready-to-use contact spray with a comfort wand that makes quick, precise weed control on gravel driveways simple and practical.
Choosing the Right Weed Killer for Brick Patio: Key Factors to Consider
Mode of Action
Different weed control methods work in different ways and that affects both results and safety. Contact treatments scorch foliage but often leave root systems intact, which can lead to quick-looking improvement followed by regrowth. Systemic products are absorbed and translocated to roots but may require more time to show effect. Residual herbicides create a period of soil activity that prevents seeds from establishing, which can reduce future weeding but can also affect desirable plants nearby.
Understanding the mode of action helps you match a product to your goal. For an ornamental brick patio where preventing staining and protecting adjacent plantings matter, a targeted, short-residual systemic spot treatment might be preferable to a broad-spectrum residual applied across soil-filled joints.
Surface Compatibility and Staining Risk
Brick and mortar vary in porosity and finish, and some chemical weed treatments can cause discoloration, efflorescence, or mortar softening if they are not masonry-compatible. Acidic or strongly alkaline solutions are more likely to react with certain bricks or joint material. Granular products that are washed into joints can also leave gritty residues that attract moisture and encourage freeze-thaw damage.
Evaluate whether a product is labeled safe for hardscapes or recommends rinsing protocols after application. When in doubt, test a small, inconspicuous area first and follow application and rinsing instructions closely to preserve the appearance and integrity of the patio.
Impact on Nearby Plants and Soil Health
Patios usually sit next to beds, lawn edges, or container plantings. Drift, splash, or runoff from a weed control application can injure desirable plants or reduce soil life. Some herbicides are non-selective and will damage any green tissue they contact. Others can persist in the soil and inhibit seed germination for a period after use.
Consider proximity to roots of shrubs or perennials and the direction of prevailing winds. Choose low-drift application methods, spot-treat rather than broadcast when possible, and follow label guidance on buffer zones to protect surrounding plantings and beneficial soil organisms.
Application Method and Timing
How you apply a weed killer matters for both effectiveness and safety. Brush-on or gel formulations allow targeted treatment of stubborn weeds in joints without saturating the masonry. Sprays reach a broader area quickly but require care to avoid drift and overspray onto desirable plants or porous brick. Timing matters too; most products work best on actively growing weeds during warm conditions, and some need several days of dry weather to take full effect.
Plan applications for calm weather, when weeds are not drought-stressed, and follow instructions on reapplication intervals. For seasonal maintenance, consider integrating mechanical control such as scraping or brushing before applying a treatment to improve contact with roots.
Ease of Use and Safety Precautions
The practicalities of mixing, applying, and storing a weed control product influence whether you will use it correctly and safely. Concentrates that require dilution are economical but demand accurate measuring and safe handling. Ready-to-use sprays and gels reduce setup but can be more expensive per application. Personal protective equipment, storage instructions, and cleanup guidance should fit your comfort level and experience.
Select products with clear labeling and straightforward application steps. Keep in mind that ease of rinsing masonry after treatment, disposal of leftover product, and compatibility with common garden clothing and gloves all affect real-world usability.
Long-Term Maintenance and Regrowth Expectations
Some approaches focus on immediate removal while others aim to suppress future seedlings. Mechanical methods combined with a targeted treatment can give the cleanest joints for longer, but no option guarantees permanent clearance. Environmental factors like nearby seed sources, bird activity, and joint depth influence how quickly weeds return.
Set expectations based on the product type: contact herbicides usually require follow-up treatments, systemic options reduce regrowth but can be slower, and residual products reduce new seedlings but also require care to avoid impacting desirable plants. A maintenance plan that includes periodic spot treatment, joint brushing, and addressing sources of seed will prolong results.
Preparing the Patio for Treatment
Start by clearing loose debris and sweeping between bricks to expose weed foliage and roots. Removing surface grit and organic matter improves contact between any applied product and the plant tissue or roots you're targeting.
For stubborn, deep-rooted weeds, use a narrow trowel, jointing tool, or a stiff brush to loosen or extract as much root material as possible before applying a chemical treatment. Mechanical removal first reduces the amount of product needed and minimizes runoff into joints.
- Work on a dry, calm day to reduce drift and runoff.
- Test any liquid product on a small area of brick to check for staining.
- Use hand tools near delicate mortar to avoid physical damage.
Spot Treatment Techniques
Targeted application limits exposure of masonry and nearby plants. Use a narrow spray tip, brush-on formulation, or gel to apply product directly to the weed canopy and crowns in the joint. This helps concentrate action where it is needed and reduces the chance of runoff that could affect brick color or adjacent plantings.
After treatment, avoid washing the area for the time recommended by the product to allow absorption. If stains appear or the product instructs rinsing to protect surfaces, follow the label's rinse procedure on a small section first.
- Apply during active growth for best uptake.
- Avoid sweeping treated foliage into planting beds.
Non-Chemical Alternatives and Complementary Methods
Heat-based tools, such as flame weeders or hot water systems, can provide immediate visual control without chemicals, though they may require repeat treatments and carry their own risks for mortar and nearby plants. Manual removal and a regular joint-sweeping schedule are low-cost options that reduce reliance on chemical control.
Covering joints with polymeric sand or reinstalling joint filler can suppress seedlings by reducing space for soil and seed accumulation. These measures work best when combined with an initial weed-clearing and occasional targeted treatments to handle any seeds that arrive later.
- Use non-chemical methods where masonry is very old or fragile.
- Combine approaches for longer-lasting results.
Timing Treatments Around Weather and Seasons
Most weed control methods perform best when weeds are actively growing. Late spring through early fall is typically prime time for treatments, depending on your local climate. Avoid applying before heavy rain, which can wash products from joints into surrounding soil or drains.
For winter-preparation, remove obvious growth and consider a late-season treatment for perennial weeds to reduce winter survival. Repeat spot treatments in the growing season to address new seedlings before they set seed and worsen the problem.
- Check forecast for at least 24 hours of dry weather after application.
- Target perennial weeds before flowering for better root control.
Protecting Surrounding Plants and Waterways
Preventing off-target damage is a practical concern, especially when a patio borders garden beds or slopes toward drains. Apply low-drift methods, create shielded application zones, and avoid broadcast spraying when desirable plants are nearby. Rinse tools and equipment away from planting beds.
If runoff into storm drains or waterways is possible, choose products with minimal leaching risk and follow local disposal guidance. Physical barriers, such as damp rags or cardboard, can block inadvertent splash onto soil and plantings while you apply treatments.
- Work upslope from sensitive areas and avoid washing residues into drains.
- Keep pets and children off the patio until treated areas are dry and any reentry interval has passed.
How We Chose the Best Weed Killer for Brick Patio
To identify the best options for use on brick patios we applied practical, garden-focused filters that matter to homeowners and gardeners. We prioritized demonstrable control of weeds common in mortar joints and paver gaps, looking for products or methods that reduce regrowth by attacking roots or preventing seedling establishment. Surface safety was a second key filter: treatments that avoid staining, mortar degradation, or accelerated brick weathering ranked higher. We also considered mode of action and application convenience, since contact-only sprays perform differently than systemic or residual products. Speed of visible control and longevity of effect were both weighed so the list includes fast-acting spot treatments and longer-lasting suppressants. Ease of application and compatibility with nearby plants and hardscaping received attention because many patios are adjacent to beds or containers. Exclusions: we omitted methods that are impractical for routine home use, products explicitly unsafe for masonry, and strategies that require specialized licensing or heavy equipment. The resulting shortlist reflects options that balance efficacy, masonry safety, and homeowner practicality.
FAQ
Can I use a general garden weed killer on brick joints?
Often you can, but not all general weed killers are formulated with masonry safety in mind. Choose a product labeled for hardscapes or use targeted application methods to minimize contact with porous bricks and mortar. Testing a small area first helps avoid unexpected staining or damage.
How long before I can walk on a treated patio?
Reentry times vary by product and formulation. Many ready-to-use contact sprays dry within an hour and allow foot traffic, while some systemic or gel products advise waiting until treated foliage is dry or until a short reentry interval listed on the label. Follow the product instructions for safe timing.
Will a weed killer prevent seeds from germinating between bricks?
Some products have residual activity that suppresses seed germination for a period, while contact treatments do not. Residual options can reduce new seedlings but may affect desirable plants if they touch the treated area, so use cautiously and according to label directions.
Are natural or homemade solutions effective on brick patios?
Natural treatments like boiling water, vinegar, or manual removal can remove small weeds and are low-risk for chemical exposure. They are often less persistent than commercial products and may require repeated applications, but they are useful when masonry is delicate or when you prefer non-chemical options.
How often will I need to re-treat weeds on a brick patio?
Frequency depends on the method and local conditions. Contact treatments and manual removal commonly need more frequent follow-up, sometimes every few weeks, while systemic or residual products can extend control to months. Regular maintenance and addressing seed sources reduce the need for frequent retreatment.
Will treatments harm pets or children if they use the patio later?
Risk depends on the product and how thoroughly it dries or is rinsed off. Many formulations have short reentry intervals after drying, but always read the safety guidance on the label and keep pets and children away during application and until the product is safe per instructions.
Final Verdict
Choosing the right weed killer for a brick patio is a balance between effective plant control and protecting the masonry and nearby plantings. Prioritize methods that match your maintenance style: targeted spot treatments and mechanical removal reduce masonry exposure while systemic or residual options offer longer suppression. Test in an inconspicuous spot, follow safety and application instructions, and pair chemical treatments with routine sweeping and joint care to extend results. With a considered approach you can keep brick patios clean and safe without compromising the look or integrity of the hardscape.






