Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If creeping Charlie is creeping through your lawn, you need a targeted approach that kills the weed without knocking back desirable turf. Choosing the right weed and feed matters because some formulations control creeping Charlie effectively while others only suppress it or harm certain grass types. This guide shortlists top products suited to the specific task of killing creeping Charlie and explains the practical tradeoffs you should expect in an active yard. We evaluated options that combine a fertilizer program with herbicide chemistry aimed at broadleaf weeds. Below you will find practical guidance on what to look for, how timing and turf type affect results, and the main differences between granular and liquid treatments.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | Scotts Turf Builder Triple Action 14.1 lb | ![]() |
| Best Quality Built to a higher standard if you want something more solid | BioAdvanced 5-in-1 Weed and Feed Granules (9.6 lb) | ![]() |
| Best Budget The cheapest option that still gets the job done reliably | Scotts Turf Builder Liquid Lawn Food Plus Weed Control, 32 fl. oz. | ![]() |
| Highest Rated A top-rated pick with lots of positive feedback | Scotts Turf Builder WinterGuard Fall Weed & Feed, 11.43 lb | ![]() |
| Most Popular A crowd favorite that many people choose with confidence | Spectracide Weed & Feed 20-0-0, Dual Action Liquid, 32 fl oz (3-Pack) | ![]() |
| Best Seller A high-volume bestseller chosen again and again | GreenView Weed & Feed Lawn Fertilizer, 39 lb (Covers 15,000 sq ft) | ![]() |
Scotts Turf Builder Triple Action 14.1 lb
| Item Form | Granule |
|---|---|
| Coverage | 5,000 sq. ft. |
| Active Ingredients | Pendimethalin 1.22%, 2,4-D 1.22%, Dicamba 0.081% |
Scotts Turf Builder Triple Action combines weed control, crabgrass prevention, and fertilizer in one granular bag to simplify spring lawn care. You apply it with a broadcast spreader when dandelions are actively growing and the grass is wet so granules stick to weed leaves, then water 24 hours later to move the preventative ingredient into the soil. The formula lists active herbicides (pendimethalin, 2,4-D, and dicamba) plus nutrients, so it both removes many common broadleaf weeds and establishes a barrier against new grassy weeds like crabgrass for up to four months while feeding the grass. In practice this reduces the number of separate products and applications needed across a 5,000 sq. ft. lawn. Important limitations are the restricted application window and safety precautions: follow label directions, avoid use on sensitive grass types or newly seeded lawns, and keep people and pets off treated areas until dust settles. Also it will not kill existing crabgrass, only prevent future germination.
Best for: Homeowners who prioritize strong seasonal performance and want a single product to reduce application steps while improving lawn density and weed suppression.
Less Ideal for: Those with newly seeded or very young lawns, people who prefer organic-only products, or gardeners treating areas near ponds or sensitive aquatic life.
- Three-in-one formula combines fertilizer, broadleaf weed control, and crabgrass prevention
- Covers up to 5,000 sq. ft. from a single 14.1 lb bag
- Designed for use with a Scotts spreader for even application
- Provides up to four months of crabgrass prevention when applied correctly
- Contains herbicides that require careful handling and re-entry restrictions
- Does not kill existing crabgrass, only prevents new germination
Verdict: If you want a performance-focused, all-in-one spring treatment to feed your lawn while preventing crabgrass and controlling common broadleaf weeds, this product delivers in a single application.
BioAdvanced 5-in-1 Weed and Feed Granules (9.6 lb)
| Item Form | Granule |
|---|---|
| Coverage | 4000 square_feet |
| Active Ingredients | Dicamba, Quinclorac |
BioAdvanced 5-in-1 Weed and Feed is a granular lawn treatment that combines multiple herbicides with fertilizer so you can kill existing weeds and feed turf in a single application. You apply it with a broadcast or drop spreader to an established, dry lawn, then water in and avoid mowing for at least a day. The formula targets over 200 broadleaf weeds and large crabgrass and creates a soil barrier that helps prevent new listed weeds for up to six months while feeding and greening the lawn for about three months. Practical features include granular form for easy even coverage and instructions for follow-up watering and safety precautions. Important limitations are usual for combined herbicide-fertilizers: it is intended for established turf rather than newly seeded lawns, and precautions are needed around children, pets, and windy applications. It is not labeled for sale in all states and requires following label directions closely for best results.
Best for: Homeowners who want a low-effort, maintenance-friendly product to reduce separate purchases and applications and keep an established lawn greener while controlling common weeds.
Less Ideal for: People establishing a new lawn from seed, managing sensitive ornamentals near turf, or those who prefer non-chemical weed control methods.
- Combines weed control and fertilizer in one application for convenience
- Controls both broadleaf weeds and large crabgrass and helps prevent new weeds for up to six months
- Granular formula spreads evenly with a broadcast or drop spreader for uniform coverage
- Feeds and greens turf for up to three months after application
- Not suitable for newly seeded or delicate lawns where herbicides can inhibit germination
- Requires careful handling and exclusion of children and pets until treated areas are dry
Verdict: Use this product when you want one granular application to both kill common and crabgrass weeds and feed an established lawn for months of reduced maintenance.
Scotts Turf Builder Liquid Lawn Food Plus Weed Control, 32 fl. oz.
| Unit Count | 32 Fluid Ounces |
|---|---|
| Item Form | Liquid |
| Coverage | 2000 square feet |
| Included Components | Scotts Turf Builder Liquid Lawn Food Plus Weed Control |
This Scotts Turf Builder product combines a liquid fertilizer with a contact weedkiller in a reusable hose‑end applicator, so you can feed your lawn and spot‑treat many broadleaf weeds in one quick pass. It is used by connecting the bottle to a garden hose, spraying evenly across actively growing turf, then shutting off and disconnecting the hose. Notable features include a translucent bottle for visible application, a refillable sprayer designed for future refills, and a formula labeled for common grasses such as bluegrass, fescue, and rye. In practice it saves time compared with separate fertilizer and weed treatments and can cover a typical small lawn in about ten minutes. Expect weeds to curl within days and plan for a repeat application in 3 to 4 weeks for stubborn plants. Limitations are that it is labeled only for listed turf grasses and should not be used in garden beds or on unlisted lawn types, and you must avoid watering for 48 hours after application and not use when temperatures exceed 85°F.
Best for: Homeowners who want a fast, low‑effort way to both feed their lawn and control common weeds without separate products, especially for small to medium sized lawns and routine seasonal maintenance.
Less Ideal for: People with mixed planting areas, vegetable or flower beds, or those with unlisted grass types who need a more targeted herbicide or a granular slow‑release fertilizer.
- Two-in-one formula feeds grass while controlling many common broadleaf weeds
- Hose‑end applicator makes coverage fast and simple for small to medium lawns
- Translucent bottle and reusable sprayer reduce guesswork and support refills
- Covers approximately 2,000 square feet per 32 fl. oz. bottle
- Only approved for listed turf grasses and can harm plants outside those uses
- Must avoid watering for 48 hours after application and limit use in high heat
Verdict: A quick, convenient 2‑in‑1 hose‑on solution for homeowners who want to feed their turf and control common lawn weeds in one easy application.
Scotts Turf Builder WinterGuard Fall Weed & Feed, 11.43 lb
| Item Form | Granule |
|---|---|
| Coverage | 4000 square feet |
Scotts Turf Builder WinterGuard is a fall granular weed-and-feed formulated to kill common broadleaf weeds such as clover and dandelion while feeding cool- and warm-season grasses. It is applied with a broadcast or drop spreader to a moist lawn on a calm day when temperatures are between 60°F and 90°F. Notable features include WeedGrip Technology to improve granule adhesion to weed leaves, instructions tuned for Scotts spreaders, and coverage sized for about 4,000 square feet per 11.43 lb bag. In practice it simplifies a seasonal task by combining weed control and fertilization in one application, which helps build root strength and recover summer stress heading into winter. Important limitations are that it is labeled for specific grass types only and must not be used on St. Augustinegrass, bentgrass, or several groundcover species, and you must avoid watering for 24 hours after application for best effect. For homeowners who want a dependable, single-step fall treatment for typical lawn weeds, this performs as advertised; those with unsupported grass types or very large lawns will need a different product or multiple bags.
Best for: Homeowners who prioritize a reliable, low-effort fall solution to eliminate clover and other broadleaf weeds while feeding their lawn for winter hardiness.
Less Ideal for: Properties planted with unsupported turf species or buyers who need coverage for very large lawns without buying multiple bags.
- Kills over 50 listed lawn weeds including clover and dandelion
- Combined fertilizer and weed control saves an extra application
- WeedGrip Technology helps granules stick to moist weed leaves for better uptake
- Clear application guidance for use with Scotts spreaders and recommended timing
- Labeled for specific grass types only and should not be used on St. Augustinegrass, bentgrass, or certain groundcovers
Verdict: Choose this product if you want a dependable one-step fall treatment that both kills clover and feeds your lawn to build stronger roots for spring.
Spectracide Weed & Feed 20-0-0, Dual Action Liquid, 32 fl oz (3-Pack)
| Item Form | Liquid |
|---|---|
| Coverage | 7,500 square feet |
| Unit Count | 96 Ounce |
| Number of Packs | 3 |
Spectracide Weed & Feed 20-0-0 is a hose-end liquid that combines fertilizer and a broadleaf herbicide so you can treat weeds and feed the lawn in one pass. You attach the QuickFlip sprayer to a garden hose and spray the product over actively growing weeds; one 32 fl oz bottle is rated to cover up to 7,500 square feet and the three-pack supplies multiple applications. The 20% nitrogen formulation helps green up grass while the active ingredient targets dandelion, clover, chickweed and similar broadleaf weeds. It requires no measuring or mixing, and application typically takes about 20 minutes per bottle depending on water pressure. Important limits to note are timing and temperature restrictions you must follow to avoid turf injury, and very tough weeds may need a follow-up spot treatment after a few weeks. Also the hose-end delivery depends on household water pressure for spray quality and coverage consistency.
Best for: Buyers who want a simple, low-effort way to control common broadleaf weeds while feeding their lawn and who prefer products with straightforward application instructions and predictable results.
Less Ideal for: Users needing selective control of grass weeds or professional landscapers seeking granular, high-precision fertilization plans should consider specialized products or professional services instead.
- Two-in-one action fertilizes lawn while killing many common broadleaf weeds
- QuickFlip hose-end sprayer for no-mix, easy application
- One 32 fl oz bottle covers up to 7,500 sq ft, and the 3-pack gives multiple treatments
- Formulated with 20% nitrogen to visibly green turf after application
- Should not be applied when air temperatures exceed 85°F to avoid grass damage
- Effectiveness on very tough or persistent weeds may require additional spot treatments
Verdict: If you want an easy, no‑mix hose-end solution to kill common broadleaf weeds while feeding your lawn, this Spectracide three-pack delivers fast, convenient coverage.
GreenView Weed & Feed Lawn Fertilizer, 39 lb (Covers 15,000 sq ft)
| NPK | 27-0-4 |
|---|---|
| Form | Granule |
| Coverage | 15000 sq ft |
| Active Ingredient | Nitrogen |
| Unit Count | 624 Ounce |
GreenView Weed & Feed is a single-application granular product that combines a slow-release nitrogen fertilizer with a broadleaf herbicide to feed turf and control common lawn weeds. It is typically applied to established lawns when weeds are actively growing, using the recommended rate and watering in afterward; the bag covers up to 15,000 square feet at the stated application rate. Notable features include MESA controlled-release nitrogen for up to eight weeks of steady feeding and labeled control of over 250 weeds such as dandelion and clover. Practical benefits are faster, uniform green-up without a surge of growth, improved root development for heat and drought tolerance, and convenience from a combined weed-control plus fertilizer approach. Important limitations are that it is intended only for established turf and specific grass species, requires careful timing (do not mow two days before or after application) and is not suitable for some grasses like dichondra or certain St. Augustine varieties in Florida, so checking the label for species compatibility is essential.
Best for: A cautious buyer who values proven results and wants a convenient, evidence-backed product to maintain and improve established warm- or cool-season lawns while reducing application frequency.
Less Ideal for: Do not choose this if you are overseeding, establishing a new lawn, or managing grass types listed as incompatible such as certain Floratam St. Augustine selections or non-turf groundcovers.
- Combines fertilizer and herbicide so you treat weeds while feeding in one application
- MESA controlled-release nitrogen provides up to 8 weeks of steady feeding
- Labeled to control over 250 common broadleaf lawn weeds
- Large 39 lb bag covers up to 15,000 sq ft at the recommended rate
- Formulation is for established turf only and can harm non-listed species
- Requires precise timing and watering instructions to work effectively
Verdict: Choose this if you want a single, proven weed-and-feed product that delivers steady feeding and broadleaf weed control across common established turf.
Choosing the Right Weed and Feed to Kill Creeping Charlie: Key Factors to Consider
Active Ingredient and Labeled Control
What the product lists as its active ingredient determines whether it will reliably kill creeping Charlie rather than temporarily suppress it. Look for herbicides with a documented effect on perennial broadleaf weeds and that explicitly include ground ivy, creeping charlie, or perennial broadleaf weeds on the label.
Labels also spell out concentration and whether the product is intended for spot treatment versus broadcast application. Understanding the chemistry helps you predict speed of control, likelihood of regrowth, and safe tank-mix options if you plan to pair with other treatments.
Lawn Species Compatibility
Different turfgrasses tolerate broadleaf herbicides to varying degrees. Cool-season grasses like Kentucky bluegrass, fescues, and perennial ryegrass often handle certain broadleaf herbicides well, while warm-season grasses can be more sensitive and suffer burn or thinning if a product is not labeled for them.
Check the label for listed grass types and any application rate adjustments. Applying a product outside its recommended turf list increases the risk of damage, so matching product to your lawn species is essential for achieving weed control without compromising the turf.
Timing and Seasonal Conditions
Creeping Charlie is most vulnerable at specific growth stages and temperatures. Applications tend to be most effective in cooler, active growth periods for the weed-often early spring and fall-when translocation of herbicide to roots is maximized.
Weather matters: avoid application before heavy rain or during heat stress. Labels specify temperature ranges, rainfall windows for avoiding wash-off, and whether multiple treatments are needed. Planning applications around these windows increases the chance of a successful kill and reduces unnecessary stress on lawn grass.
Formulation and Application Method
Weed and feed products come as granules or liquid concentrates. Granular products are convenient for broadcast spreaders and often include a measured fertilizer component. Liquid formulations can offer more precise coverage, easier spot treatment, and different tank-mix possibilities.
Consider how easily you can apply the product uniformly over the problem area, whether you need spot treatment tools, and how the chosen formulation affects runoff, drift, and safety for adjacent beds or ornamentals.
Fertilizer Balance and Turf Recovery
Because weed and feed combines nutrition with herbicide, the fertilizer ratio matters for turf recovery after weed control. A balanced fertilizer can help grass recover quickly from herbicide stress, but high nitrogen at the wrong time can encourage weed regrowth or burn stressed turf.
Choose a product whose nutrient timing matches your lawn care calendar and local growing conditions. Also consider whether a separate fertilization plan might be better than a combined product for your specific turf health goals.
Environmental Persistence and Safety
Residual activity affects how long the product controls regrowth and whether re-treatment will be necessary. Longer residuals can suppress new seedlings but may also increase risk to non-target plants and nearby garden beds.
Read label directions on buffer zones, watering restrictions, and safe intervals before reseeding or overseeding. Consider the environmental footprint for your yard, especially near water features, edible plantings, or pollinator habitat.
When to Treat Creeping Charlie for Best Results
Timing your application to the weed's active growth stage is one of the most practical ways to improve control. Creeping Charlie is most susceptible when it is actively growing and moving carbohydrates to roots, which usually occurs during cool, moist periods in spring and again in early fall.
Avoid treating during hot, drought-stressed conditions because the plant may not translocate herbicide effectively and your lawn grass is more likely to show stress. Also plan around rain forecasts: heavy rain shortly after application can reduce efficacy unless the label specifies rapid rainfastness.
- Early spring when leaves are emerging and temperatures are cool
- Early fall during renewed growth before first hard frost
- Avoid mid-summer heat and drought-stressed turf
Spot Treatment Versus Broadcast Applications
Decide whether to treat the whole lawn or only patches. Spot treatment conserves product and reduces exposure to non-target plants, but creeping Charlie spreads via runners and might require follow-up treatments beyond visible patches.
Broadcast applications are useful for widespread infestations and usually pair well with fertilizer timing. For spot treatments, choose a formulation that allows good coverage and careful calibration to avoid overdosing small areas.
- Spot treat small, isolated patches to limit herbicide use
- Broadcast when infestation is widespread or recurring
- Combine spot checks with cultural controls like improved mowing and drainage
Cultural Practices That Complement Chemical Control
Herbicide treatments work best when combined with cultural practices that make the lawn less hospitable to creeping Charlie. Improving soil drainage, raising mowing height slightly to shade the soil, overseeding thin areas, and maintaining proper fertility reduce bare ground that the weed exploits.
Regular mowing and a dense turf canopy limit light to seedlings and slow recolonization. Addressing compacted soil and pH imbalances can also make a big difference in long-term weed pressure.
- Raise mower height to promote deeper-rooted turf
- Overseed bare or thin patches after the label-allowed reseeding interval
- Amend soil and correct compaction to discourage weed spread
Safety Around Beds, Trees, and Edibles
Prevent drift and runoff onto flower beds, vegetable gardens, and water features. Many broadleaf herbicides can damage ornamentals and non-target plants at low concentrations. Use buffer zones and avoid applications just before irrigation or heavy rain.
When treating near trees and shrubs, think about root overlap and surface runoff. Spot treatments, physical barriers, or postponing treatment until you can protect sensitive plants reduce the chance of accidental damage.
- Keep a safe distance from garden beds and young trees
- Avoid application before expected rainfall
- Use calibrated equipment and consider hand-applied spot treatments near sensitive plants
Re-treatment and Long-Term Management
Creeping Charlie often requires more than one season to control fully. Some products need repeat applications timed according to label intervals, while others rely on cultural follow-up to prevent reseeding and spread.
Factor in monitoring after the first treatment and plan scheduled follow-ups. Combining chemical control with improved turf health reduces reliance on repeated herbicide use over time.
- Inspect treated areas regularly for regrowth
- Follow label intervals for repeat applications
- Prioritize lawn improvements to reduce future infestations
How We Chose the Best Weed and Feed to Kill Creeping Charlie
We focused on products that specifically address creeping Charlie control while supplying nutrition that supports turf recovery. Our editorial filters emphasized chemistry known to work on perennial broadleaf weeds, labeled effectiveness in cool-season lawns, and recommendations for safe timing and application rates. Evaluation criteria included the active-ingredient profile and labeled spectrum of control, lawn safety and grass-type compatibility, application timing and seasonal windows for best results, ease and accuracy of application, and residual effects including re-treatment intervals. We excluded products that list only suppression without labeled kill of perennial ground ivy or that are restricted-use or not intended for home lawn care. We also considered formulation tradeoffs: granular blends that combine fertilizer and herbicide versus tank-mix liquids, as well as limitations such as temperature sensitivity, rainfast windows, and any special handling instructions. The final shortlist balances likely field performance with practical gardener concerns around safety and turf recovery.
FAQ
Can I use weed and feed on any grass to kill creeping Charlie?
It depends. Many weed and feed products are labeled for specific turf types. Some grasses tolerate common broadleaf herbicides better than others, so always check the label for listed grass species and rate adjustments.
How long after application will I see results on creeping Charlie?
You will usually see wilting or discoloration within a week, but complete control can take several weeks as the herbicide moves to the roots. Cooler temperatures and active weed growth increase speed of control.
Is it better to spot treat or broadcast when dealing with ground ivy?
Spot treating is efficient for isolated patches and reduces non-target exposure. Broadcast applications are more practical for widespread infestations. Your choice should consider infestation extent, proximity to sensitive plants, and equipment accuracy.
Will fertilizing at the same time affect herbicide performance?
Combined formulations are designed to pair nutrition with herbicide, but excessive nitrogen or wrong timing can stress turf and reduce herbicide uptake. Follow label timing and choose a product whose fertilizer component matches your lawn care calendar.
Can I overseed or reseed soon after applying weed and feed?
Most labels require waiting a specific interval before overseeding to avoid harming seedlings. The interval varies by product and may be several weeks. Check the product directions and plan reseeding accordingly.
How should I protect nearby flower beds and vegetables during application?
Create buffer zones, avoid spraying or spreading near edges, and do not apply before heavy rain. For liquids, minimize drift by choosing calm conditions and using low-pressure settings. For granules, keep material off hardscapes that could wash toward beds.
Final Verdict
Focus on matching the herbicide chemistry and formulation to both your turf type and the infestation pattern. Prioritize timing when creeping Charlie is actively growing and combine chemical control with cultural practices that strengthen turf and reduce bare spots. Expect that control may take more than one season, and plan follow-up monitoring, safe application practices, and lawn recovery steps. Prioritizing labeled compatibility, proper timing, and turf recovery will give you the best chance of eliminating creeping Charlie while keeping your lawn healthy.






