Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
A properly matched pressure washer pump determines how effectively you clean concrete, siding, decks, and equipment. Pick the wrong pump and you may have inadequate pressure, short service life, or maintenance headaches. This guide covers seven shortlisted pumps chosen for different garden and property tasks, from occasional patio cleaning to frequent heavy-duty work. We evaluate each option on flow and pressure output, construction and seal longevity, and how easy the pump is to maintain so you can pick the right unit for your cleaning schedule. Read on to compare core features and practical tradeoffs before the product list.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | YAMATIC 1" Shaft Triplex Pressure Washer Pump, 4000 PSI 3.7 GPM |  |
| Best Quality Built to a higher standard if you want something more solid | WOJET PA3030 High-Flow Triplex Pressure Washer Pump 4400 PSI, 4.0 GPM |  |
| Best Value The sweet spot between price and what you get | SIMPSON OEM Technologies 90028 3300 PSI 2.4 GPM Horizontal Pressure Washer Pump Kit |  |
| Best Budget The cheapest option that still gets the job done reliably | EZJOB 2400–2800 PSI 3/4" Shaft Horizontal Pressure Washer Pump |  |
| Highest Rated A top-rated pick with lots of positive feedback | Hochspuel 1" Shaft Triplex Pressure Washer Pump — 4300 PSI, 4.4 GPM |  |
| Most Popular A crowd favorite that many people choose with confidence | YAMATIC 3/4" Horizontal Shaft Pressure Washer Pump, 3400 PSI 2.5 GPM |  |
| Best Seller A high-volume bestseller chosen again and again | YAMATIC 2500 PSI Horizontal Pressure Washer Pump, 2.3 GPM (3/4" Shaft) |  |
YAMATIC 1" Shaft Triplex Pressure Washer Pump, 4000 PSI 3.7 GPM
| Power Source | Gas Powered |
|---|---|
| Flow Rate | 3.7 gpm |
| Material Type | Aluminum, Brass |
| Product Style | Triplex 1" Shaft |
The YAMATIC 1" shaft triplex pump is a direct-replacement-style pressure washer pump built for heavier-duty cleaning tasks. It delivers up to 4000 PSI at 3.7 GPM, which makes it capable of breaking down grease, road grime, and built-up dirt on patios, vehicles, and light industrial equipment. The unit is made from aluminum and brass components, includes a visual oil-level window for easy maintenance checks, and offers manual pressure adjustment so you can lower pressure for delicate surfaces or crank it up for stubborn residue. It is intended to swap into compatible gas-powered washers that use a 1" shaft and comes with five nozzles to cover common spray needs. Practical benefits include a robust construction for longer service life and straightforward installation for a homeowner who performs their own maintenance. Limitations are that it is a replacement pump only, so compatibility with specific machines must be confirmed and specialized installation or alignment may be required for some frames and engines.
Best for: Buyers who want a robust, serviceable replacement pump to restore or upgrade the cleaning power of a gas-powered pressure washer and who are comfortable doing basic mechanical swaps and maintenance.
Less Ideal for: Casual users who need a complete pressure-washer unit or who prefer plug-and-play electric systems without any mechanical installation work.
- High cleaning power with 4000 PSI and 3.7 GPM suitable for heavy-duty washing
- Triplex plunger design and aluminum/brass construction for durability under continuous use
- Built-in visual oil-level window simplifies maintenance checks
- Manual pressure adjustment and five included nozzles provide versatile spray options
- Sold as a replacement pump only so compatibility must be verified before purchase
- May require mechanical alignment or minor modification during installation on some machines
Verdict: A durable, high-pressure 1" shaft triplex pump that restores professional-level cleaning power to compatible gas-powered washers.
WOJET PA3030 High-Flow Triplex Pressure Washer Pump 4400 PSI, 4.0 GPM
| Max Pressure | 4400 PSI |
|---|---|
| Max Flow Rate | 4.0 GPM |
| Engine Size Required | 9-15 HP |
| Pump Type | Triplex Plunger |
| Shaft | 1" Hollow Shaft |
The WOJET PA3030 is a direct-drive triplex plunger pump designed to restore or build a high-performance gas pressure washer rig. It mounts to 1-inch horizontal engine shafts on 9–15 HP engines and produces up to 4400 PSI at 4.0 GPM, making it suitable for heavy-duty cleaning like fleet washing, construction equipment, and large driveways. Notable features include a corrosion-resistant brass head with polished ceramic pistons, an integrated unloader for continuous cooling when the trigger is released, and self-priming capability so it can draw from tanks or pools when a tap is not available. The pump ships pre-sealed and oil-filled with a shaft key, siphon hose with filter, and mounting bolts for straightforward installation. Practical benefits are strong sustained pressure, reduced engine load from efficient flow, and serviceable components for longer life. Limitations are that it only fits direct engine crankshaft mounts and horizontal-shaft engines with a 1" shaft, so you will need the correct engine class and no alternative mounting options are supported.
Best for: Buyers who need a high-capacity, professional-grade replacement or build-ahead pump for heavy commercial or industrial cleaning and who prioritize sustained pressure and reliability over cross-platform fitment.
Less Ideal for: Casual homeowners with small electric washers or owners of engines that do not have a 1" horizontal crankshaft should consider smaller or differently mounted pumps instead.
- Delivers industrial-grade performance: 4400 PSI and 4.0 GPM for demanding cleaning jobs
- Integrated unloader provides continuous cooling under no-load to protect the pump
- Self-priming design allows drawing water from tanks or pools for mobile or remote use
- Durable construction with brass pump head and ceramic pistons for extended service life
- Direct crankshaft mount only, so it will not fit setups that require alternative mounting or adapter plates
- Requires a 1" horizontal-shaft engine in the 9–15 HP range, limiting compatibility with smaller engines
Verdict: Choose this pump when you need a rugged, high-flow triplex unit to restore or build a commercial-grade pressure washer capable of sustained heavy-duty cleaning.
SIMPSON OEM Technologies 90028 3300 PSI 2.4 GPM Horizontal Pressure Washer Pump Kit
| Power Source | Gas Powered |
|---|---|
| Flow Rate | 2.4 gpm |
| Maximum Lifting Height | 22 meters |
| Material Type | Silver Aluminum |
This SIMPSON OEM Technologies 90028 pump is a direct-replacement axial cam pump kit built to restore cleaning power to compatible gas pressure washers. It installs using an SAE bolt pattern and a 3/4" shaft, and the kit arrives with the pump, mounting hardware, siphon hose with filter, shaft key, and instructions so you can replace a worn unit without buying a whole machine. The pump is die-cast aluminum with stainless steel pistons and an integrated unloader for easier starts, and a thermal relief valve protects the unit during bypass to reduce overheating risk. A maintenance-free crankcase means no routine oil changes, which lowers upkeep. In practice this pump is rugged enough for regular home and vehicle cleaning jobs and should noticeably restore pressure and flow when matched to a compatible engine. Important limitations are that it is intended for gas horizontal engines only and is not an electric pump, so it will not work for buyers seeking an electric-pressure-washer solution or those who need different shaft or mount orientations.
Best for: Practical DIYers and budget-conscious owners who want to repair a compatible gas pressure washer and avoid the cost of replacing the entire machine.
Less Ideal for: People shopping specifically for an electric pressure washer pump or owners of pressure washers with vertical engines or nonstandard shaft sizes.
- Complete kit including pump, mounting hardware, siphon hose, and shaft key for easier installation
- Maintenance-free crankcase eliminates routine oil changes
- Thermal relief valve protects the pump from overheating during bypass
- Die-cast aluminum body and stainless steel pistons for corrosion resistance and longer seal life
- Designed for gas pressure washers with a horizontal 3/4" shaft so it will not fit vertical engines or electric units
- Does not include detailed compatibility verification for every engine so buyers must confirm shaft size and inlet/outlet orientation
Verdict: If you want an affordable, ready-to-install replacement to restore a compatible gas pressure washer, this kit delivers professional-level pressure and low-maintenance operation.
EZJOB 2400–2800 PSI 3/4" Shaft Horizontal Pressure Washer Pump
| Power Source | Internal Combustion Engine |
|---|---|
| Flow Rate | 3.1 gpm |
| Horsepower | 5 hp |
| Material Type | Aluminum |
This EZJOB replacement pump is a practical, no-frills option for bringing a tired gas pressure washer back to life. It is a 3/4" horizontal-shaft triplex pump pre-filled with oil and fitted with a thermal relief valve, unloader and chemical injection port, delivering roughly 2400–2800 PSI at about 2.5–3.1 GPM for routine cleaning tasks like driveways, patios, vehicles and siding. Installation is intended for engines with a 3/4" shaft and typical horizontal mounting; the pump’s aluminum body keeps weight down while offering corrosion resistance. Because it ships pre-filled and includes a keyway and easy-start valve, it simplifies replacement and reduces initial setup. The main limitations are fit sensitivity and compatibility: you must verify shaft size, mounting pattern and inlet/outlet orientation before buying, and it does not fit every model even within listed brands. For a budget-focused homeowner who wants to repair rather than replace a whole unit, this pump provides solid cleaning power and straightforward installation when the dimensions match.
Best for: Homeowners who want to repair a gas pressure washer on a tight budget and are comfortable checking fit details to replace only the pump instead of buying a new machine.
Less Ideal for: Users who need a universal or plug-and-play replacement without measuring or who have vertical-shaft or nonstandard mounting pressure washers.
- Pre-filled with oil and includes thermal relief valve for reduced initial maintenance
- Aluminum pump body offers corrosion resistance while keeping weight lower
- Includes keyway and easy-start valve to simplify installation
- Delivers around 2400–2800 PSI and about 2.5–3.1 GPM suitable for common outdoor cleaning
- Requires careful fit verification because mounting pattern and shaft specs vary between models
- Limited to horizontal 3/4" shaft engines and not compatible with all series of listed brands
Verdict: An affordable, ready-to-install horizontal 3/4" replacement pump that restores everyday cleaning power for budget-minded owners who confirm fit before buying.
Hochspuel 1" Shaft Triplex Pressure Washer Pump — 4300 PSI, 4.4 GPM
| Maximum Pressure | 4300 psi |
|---|---|
| Maximum Flow Rate | 4.3 gpm |
| Power Source | Gas Powered |
This Hochspuel triplex pressure washer pump is built as a direct replacement for 1" horizontal shaft gas engines and focuses on durable, commercial-style performance. It installs using a standard mounting flange and 3/4" inlet and 3/8" quick-connect outlet, so it is typically used to restore or upgrade a gas-powered washer driven by GX270/GX340/GX390-class engines. Key features include a forged brass manifold, ceramic-coated plungers, an anodized aluminum crankcase and a built-in oil sight glass; those choices reduce corrosion, wear and simplify maintenance. The pump ships factory-filled with premium oil so you can install and run it immediately. It is rated to produce up to 4300 PSI and about 4.3–4.4 GPM, with recommended operation near 3500 PSI at 3400 RPM for long life. Limitations to note are that it is for cold-water use only and it requires a compatible 1" horizontal shaft engine and correct plumbing to get full performance. Overall it is a workhorse replacement for owners who prioritize longevity and serviceability.
Best for: Owners of gas-powered pressure washers who need a dependable, serviceable replacement pump and who prioritize long-term durability over low cost.
Less Ideal for: Casual users with small electric pressure washers or anyone needing a hot-water pump should look for a different product.
- Commercial-grade triplex design with ceramic-coated plungers for smoother output and extended wear life
- Forged brass manifold and anodized aluminum crankcase resist corrosion and improve durability
- Factory-filled oil and integrated sight glass make initial setup and ongoing oil checks quick
- Fits common 9–15 HP horizontal shaft gas engines and uses standard inlet/outlet fittings for straightforward replacement
- Cold-water use only so not suitable for hot-water cleaning applications
- Requires a compatible 1" horizontal shaft engine and correct plumbing to achieve rated pressure and flow
Verdict: Buy this pump if you want a rugged, serviceable triplex replacement that restores commercial-grade pressure and longevity to a 1" horizontal-shaft gas washer.
YAMATIC 3/4" Horizontal Shaft Pressure Washer Pump, 3400 PSI 2.5 GPM
| Max Pressure | 3400 PSI |
|---|---|
| Max GPM | 2.5 GPM |
| Pump Type | Axial Cam |
| Shaft Diameter | 3/4" Horizontal Shaft |
| Pre-filled Oil | Yes |
This YAMATIC pump is a direct-replacement axial cam unit designed for gas pressure washers with a 3/4-inch horizontal engine shaft. It arrives pre-filled with oil and includes mounting bolts, a siphon hose, and a shaft key to simplify installation. The pump is built with aluminum pump head and brass fittings including inlet, outlet, thermal relief valve, and soap injector port, and it offers an adjustable unloader to tune operating pressure to your engine. In practice it restores strong cold-water cleaning power for sidewalks, vehicles, decks, and siding when matched to compatible engines and bolt patterns. Notable benefits are the thermal relief valve and double-seal design aimed at longer service life and a 200-hour rated running life. Important limits are strict compatibility requirements: it is only for horizontal 3/4" shafts, not for vertical shafts, 7/8" or 1" outputs, and it is not for hot-water systems. Buyers should verify shaft diameter, mounting pattern, inlet/outlet orientation, and frame clearance before installation.
Best for: Buyers who need a reliable, low-cost replacement pump to restore cleaning power to a compatible gas pressure washer and who value clear compatibility confirmation and included installation hardware.
Less Ideal for: People with vertical-shaft engines, 7/8" or 1" shaft outputs, electric pressure washers, or users who need a hot-water pump.
- Pre-filled with oil and includes mounting hardware for faster installation
- Solid brass fittings and thermal relief valve for corrosion resistance and heat protection
- Adjustable unloader lets you match pump pressure to the engine for safer operation
- Double-seal design and upgraded piston/bearing surfaces for improved durability
- Only compatible with 3/4" horizontal engine shafts and specific mounting patterns
- Not rated for hot-water use
Verdict: A practical, ready-to-install replacement pump that reliably revives compatible 3/4" horizontal-shaft gas pressure washers for strong cold-water cleaning.
YAMATIC 2500 PSI Horizontal Pressure Washer Pump, 2.3 GPM (3/4" Shaft)
| Power Source | Gas Powered |
|---|---|
| Flow Rate | 2.3 gpm |
| Horsepower | 5.5 hp |
| Material Type | Aluminum, Brass |
| Included Components | Pressure Washer Pump, Bolts, Injector Hose, Keys |
This YAMATIC pump is a direct-replacement axial pump intended to revive small gas-powered pressure washers that use a 3/4" shaft. It delivers roughly 2500 PSI at 2.3 GPM, which is suitable for routine cleaning tasks like driveways, decks, cars, and siding. The unit ships with bolts, a shaft key, an injector hose, and basic hardware to simplify installation; the seller provides straightforward four-step instructions for aligning the shaft, installing the key and bolts, and reconnecting lines. The aluminum and brass construction and a double-seal design are intended to reduce leaks and improve service life, and the pump includes a thermal relief valve and an adjustable unloader so you can tune pressure and protect the pump during bypass. It is marketed for compatibility with many small engines and common models but is limited to horizontal mounts with a 3/4" shaft, so confirm fit before buying. Pre-filled oil and the recommendation to drain water before storage make maintenance easier, though you should still follow seasonal winterization best practices for longevity.
Best for: Buyers who want a straightforward, low-risk replacement pump to restore a small gas pressure washer to typical residential cleaning performance and who prefer an out-of-the-box kit with basic install hardware and protective features.
Less Ideal for: Do not choose this pump if you need a high-pressure commercial unit or if your washer uses a different shaft size or vertical mounting orientation.
- Clear replacement focus for small gas pressure washers using a 3/4" horizontal shaft
- Includes installation hardware and shaft key to simplify swapping pumps
- Double-seal design and thermal relief valve to reduce leaks and protect against overheating
- Adjustable unloader lets you tune working pressure to match the engine
- Pre-filled oil for initial use reduces immediate maintenance steps
- Fits only horizontal mounts with a 3/4" shaft so it is not universal
- Manufacturer compatibility list requires verification to ensure exact fit with some engines
Verdict: A practical, ready-to-install replacement for homeowners who need a reliable 3/4" horizontal pump to get a small gas pressure washer back to normal cleaning performance.
Choosing the Right Pressure Washer Pump: Key Factors to Consider
Flow Rate and Pressure Match
Matching the pump's flow rate and maximum pressure to your cleaning tasks is essential. Flow rate, measured in gallons per minute, determines how quickly you rinse away dirt and soap. Maximum pressure, measured in pounds per square inch, affects how well you remove stuck-on grime and stains. Choosing a pump with too low flow or pressure will lengthen cleaning time, while a pump that is oversized for your nozzle or surface can cause damage.
Consider both peak and sustained outputs. Many pumps can hit high peak pressures but drop under continuous load. Look for specifications or test data that show sustained performance so the pump will behave predictably during extended jobs.
Seal Materials and Corrosion Resistance
Seals, valves, and housing materials dictate how long a pump lasts in outdoor conditions. Buna-N, Viton, ceramic, and stainless steel components each have different resistance to hot water, detergents, and mineral-laden water. Pumps with higher-grade seal compounds and corrosion-resistant housings resist leaks and need fewer rebuilds.
If you use detergents, hot water, or well water, prioritize pumps whose materials are rated for those exposures. Salt or brackish water will accelerate corrosion, so gardeners near coastal areas should look for explicitly corrosion-resistant designs.
Ease of Maintenance and Rebuildability
Routine maintenance keeps a pump reliable. Pumps that allow straightforward access to seals, valves, and bearings reduce downtime and repair cost. Consider whether common wear parts are modular and replaceable without specialized tooling. Pumps designed for simple disassembly let you service or swap seals in the garden shed rather than sending the unit for shop repair.
Also check if the manufacturer or community supplies rebuild kits and clear instructions. If routine tasks like winterizing or flushing are easy to perform, the pump will remain serviceable for longer.
Compatibility and Mounting
Fitment matters when retrofitting a pump to an existing pressure washer frame or powerhead. Pay attention to bolt patterns, shaft dimensions, and inlet and outlet thread types. A pump that matches standard fittings reduces the chance of leaks and simplifies installation.
Mounting orientation and footprint affect whether the pump sits securely on a cart or frame. Consider vibration isolation and whether the pump's mounting requires adapter plates or custom hardware.
Noise, Vibration, and Usability
Noise levels and vibration influence comfort during longer cleaning sessions. Pumps with balanced crankshafts and good bearing design run smoother and transfer less vibration to the frame and hoses. Excessive vibration can loosen fittings and accelerate wear.
Also consider how the pump integrates with controls like unloader valves and bypass routing. A pump that works with common unloader designs will be easier to tune for different nozzle sizes and cleaning tasks.
Replacement Parts and Service Support
Long-term ownership depends on the availability of replacement seals, valves, and bearings. Pumps with readily available rebuild kits and common spare part sizes are simpler to maintain. Community resources, clear part numbering, and documentation make sourcing parts straightforward.
If you expect heavy seasonal use, prioritize pumps with established aftermarket support. Otherwise, repairs can become costly or require full pump replacement rather than a simple seal change.
Sizing a Pump to Your Water Supply
Your household water supply limits what a pump can deliver. If your tap provides a low flow rate, a high-pressure pump will not reach its rated flow because it cannot conjure water. Start by measuring the available flow at the garden hose and match pump specs so the machine operates within real supply limits.
If you intend to use a garden hose, consider adding a booster or an intermediate reservoir for longer continuous runs. For well-fed systems, ensure lines are large enough to avoid cavitation. Small-diameter hoses and restrictive inlets reduce performance and shorten pump life.
- Measure static flow at the fill source before choosing a pump
- Avoid excessive inlet restrictions to prevent cavitation
- Use appropriate hose diameter recommended by pump specs
Hot-Water Versus Cold-Water Pumping
Not all pumps tolerate hot water and high-temperature detergents. If you plan pressure washing with heated water for grease or oil removal, select a pump with seals and valve materials rated for heat. Cold-water pumps often use different seal compounds that degrade faster in hot applications.
Additionally, hot-water setups usually require different maintenance intervals and may use different unloader valve settings. Confirm rated temperature limits before putting a pump into a hot-water system.
- Check temperature ratings on seals and housings
- Expect shorter service intervals in hot-water use
- Use heat-tolerant seals for detergent-heavy cleaning
Winter Care and Storage
Freezing temperatures are a common source of failure. Residual water in pump cavities expands and cracks housings or ruins seals. Always flush the pump with an appropriate antifreeze or pump saver before storing it outdoors for winter. Disconnecting and storing in a frost-free location is the safest option.
Consider pumps with simpler disassembly if you need to winterize frequently. Some pumps also have drain ports that make flushing and filling with preservative easier.
- Flush and use pump saver fluid before cold storage
- Drain inlet, outlet, and bypass passages thoroughly
- Store pumps indoors when possible to extend life
Noise Management and Mounting Tips
Reducing noise and vibration starts with the mounting. Use rubber isolators or pads between the pump and the frame to dampen vibration. Secure fittings and use thread-locking compounds where appropriate to prevent loosening during operation.
If noise is a concern for neighborhood settings, place the unit on a stable platform and avoid resonance with thin metal carts. Regularly check shaft couplings and bearings for wear, which increases noise over time.
- Use vibration isolators under the pump
- Tighten fittings and inspect couplings periodically
- Mount on a stable, non-resonant surface
Common Maintenance Tasks
Basic maintenance extends pump life and keeps performance consistent. Regularly check and replace seals and valves, inspect bearings for play, and flush the pump after detergent or debris exposure. Monitor for leaks and address small ones before they become major failures.
Keep a small kit of common replacement parts on hand if you use the pump frequently. Follow manufacturer torque and sealant specs when reassembling to avoid introducing new leaks or stresses.
- Inspect seals and valves seasonally
- Flush after chemical use or dirty water
- Keep spare o-rings and valve kits accessible
How We Chose the Best Pressure Washer Pump
We selected pumps that deliver reliable water pressure and long service life in outdoor cleaning tasks. Editorial filters focused on measurable performance and real-garden durability rather than marketing claims. Key evaluation criteria included sustained flow rate and maximum pressure under load, materials and seal design that affect corrosion resistance and wear, ease of routine maintenance and parts availability, and compatibility with common powerheads and hose fittings. We prioritized pumps built for repeated outdoor use and checked reported longevity characteristics for seals and bearings. Units that required difficult or frequent teardown for simple maintenance were downgraded. We excluded pumps intended only for indoor or specialist industrial machines, and any options lacking clear specifications for flow or inlet/outlet fittings. The final list balances performance, serviceability, and build quality so gardeners and homeowners can choose a pump suited to their cleaning frequency and water source constraints.
FAQ
How do I know what PSI and GPM I need for my cleaning jobs?
It depends on the task. Light cleaning like washing cars or furniture works well with moderate pressure and higher flow for rinsing. Tough stains on concrete need higher PSI combined with appropriate nozzle selection. Evaluate both PSI and GPM together since flow determines how quickly material is removed.
Can I replace my pump myself or do I need a technician?
Many pumps are replaceable by a competent DIYer with basic mechanical skills. Key tasks include matching shaft and bolt patterns and ensuring proper seal installation. If you are unsure about alignment or coupling procedures, professional installation reduces the risk of early failure.
What maintenance schedule keeps a pump running reliably?
Inspect seals and valves at least once per season, flush after detergent or dirty-water use, and change worn bearings when play is noticed. Frequency rises with heavy use; commercial or daily use may need monthly checks, while occasional home use often suffices with seasonal attention.
Does water quality affect pump life?
Yes. Hard water, sand, and debris accelerate seal and valve wear. Using inline filters, sediment traps, or prefilters helps protect internal components. If you use well or untreated water, more frequent maintenance and inspection are usually necessary.
Are there compatibility issues when swapping pumps between machines?
Compatibility depends on mounting pattern, shaft size, and inlet/outlet fittings. Also confirm unloader valve arrangement and bypass routing. Some pumps require adapter plates or different couplings to fit existing frames, so verify dimensions before purchasing.
How can I reduce the chance of cavitation?
Cavitation occurs when the pump cannot get sufficient inlet flow. Use adequate-diameter inlet hose, minimize long suction runs, avoid sharp bends, and ensure the water source supplies steady flow. Keeping the inlet above atmospheric restrictions and using a properly sized feed line prevents most cavitation issues.
Final Verdict
Choosing the right Pressure Washer Pump revolves around matching flow and pressure to the tasks you do most often and prioritizing durable materials and serviceability. Think about your water supply, whether you need hot-water tolerance, and how easy the pump is to repair or rebuild. Prioritize pumps that balance sustained flow, corrosion-resistant components, and straightforward maintenance. That approach reduces downtime and ensures you get reliable cleaning performance across seasons.
